SMART6-L User Manual Rev 3
50
B.3 FRESET Clear Selected Data from NVM and Reset
This command clears data which is stored in non-volatile memory. Such data includes the almanac,
ephemeris, and any user specific configurations. The commands, ephemeris, almanac, and L-Band
related data, excluding the subscription information, can be cleared by using the
STANDARD
target. The
model can only be cleared by using the
MODEL
target. The receiver is forced to hardware reset. In
addition, values entered using the
CLOCKCALIBRATE
command can only be cleared by using the
CLKCALIBRATION
target.
Abbreviated ASCII Syntax:
Message ID: 20
FRESET [target
]
Input Example:
FRESET COMMAND
FRESET STANDARD
(which is also the default) causes any commands, ephemeris, GNSS
and almanac data previously saved to NVM to be erased.
If you are receiving no data or random data from your receiver, try the following before
contacting NovAtel:
•
Verify that the receiver is tracking satellites
•
Check the integrity and connectivity of power and data cables
•
Verify the baud rate settings of the receiver and terminal device (your PC, data
logger or laptop)
•
Switch COM ports
Issue a
FRESET
command
Field Field Type
ASCII
Value
Binary
Value
Description
Binary
Format
Binary
Bytes
Binary
Offset
1
FRESET
header
-
-
This field contains the command
name or the message header
depending on whether the
command is abbreviated ASCII,
ASCII or binary, respectively
-
H
0
2
target
See
Table 10,
FRESET Target
on
page 51
What data is to be reset by the
receiver (default=STANDARD)
Enum
4
H
