Installation and Setup
Chapter 2
SMART6-L User Manual Rev 3
15
Figure 5: SMART6 Pole Mounting Plate (01019142)
2.1.4
Mounting the SMART6-L
Mount on a secure, stable structure capable of safe operation in the specific environment. Typical
installation is a vehicle roof, ideally close to the pivot point of the vehicle.
See
Section 2.2, Additional Features and Information
on page 16 for additional requirements.
To install the pole mounting plate:
1. Use four M4 screws to connect the mounting plate to the SMART6.
2. Screw the mounting plate onto a mount, such as a range pole, tribrach, or tripod, with a
1" x 14 thread.
A 5/8” to 1” bushing adapter is available (part number 12023275).
5.00
3.360
2.325
0.35
4.326
2.037
0.60
3.25 ±0.05
Ø 0.188
x 4
1.439
3.561
2.50 ±0.05
2.205
4.326
0.105
REF.
6.25
The SMART6-L must be rigidly secured to the vehicle to avoid errors caused by vibration
and motion.
