Nortel Optivity Switch, Инструкция по использованию

Страница: 116 / 192

116 Chapter 5 Using MultiLink Trunking Manager
208963-B
To open the Insert MLT dialog box, refer to “Creating an MLT with one
device” on page 111 .
Figure 49 Port dialog box
The information displayed in the dialog box includes the VLAN(s) and STG(s) to
which the port belongs and the port link status. The port link status information
includes whether the port is up or down and what other device/ports the port is
connected to.
Editing a port on an MLT
To edit a port on an existing MLT:
1 In the navigation pane, select an MLT.
The MLT table opens in the contents pane.
2
In the table, double-click the PortMembers field.
The PortMembers dialog box opens (Figure 50) .
Figure 50 PortMembers dialog box
3
Click the port numbers that you want to add or delete from the MLT.
Port numbers that appear to be pressed in are already being used, and port
numbers that are dimmed are inactive and cannot be used.
4 Click Ok.