Nortel 703t, Техническое обслуживание и диагностика

Страница: 232 / 248

703t description reference Standard 1.06
232 CallPilot
Table 22: Front panel features
Part Function
Reset button Triggers a hardware (cold) reset. Do not use
this button to perform a server restart. Restart
the server as described in “Restarting the
server” in
Installation and Configuration Task
List (555-7101-210).
Network
controller LEDs
(green) Left: 10/100Base-T controller LED
(NIC1 10/100 MB: ELAN
for Meridian 1/Succession 1000 connection)
Right: 10/100/1000Base-T controller LED
(NIC2 1 GB: CLAN
for Customer LAN connection)
Sleep mode button Not used
Power button Turns the server’s power on or off.
Status LEDs Indicate when the server is powered up and the
disk drives are active.
„
Left: hard drive activity LED (not used)
„
Center: power/sleep LED (green)
„
Right: status LED (bi-color) indicates
whether the server is functioning properly,
or whether a hardware event has occurred.
USB connector For future use
Floppy disk eject
button Ejects the floppy disk.
Floppy drive Drive for 3-1/2 inch diskettes.
IDE CD-ROM drive
(5.25 in.) Enables you to use the CallPilot software and
documentation CD-ROMs.