Norstar Compact 616 DR5, Руководство по установке

Страница: 282 / 287

Page10
Programming glossary
1st display Select the first to be displayed by the Call Display features. The default is Name.
Other settings are Number and Line. Name or Number only appear if you have subscribed to
Call Display services, otherwise line name will appear as the default.
Admin. password Assign a 1 to password for security. The default is (23646).
Answer
Up to four buttons on a telephone can be programmed for answering calls to the of other
telephones. The default is No Answer
Auto Call Info
Auto handsfree
Auto privacy
Auxiliary ringer
Enter the of other telephone to appear on answer buttons at this telephone.
Lets you identify the telephone that will automatically display Call Display information for a
specific alerting line (providing you have subscribed to Call Display services).
Choose Yes to allow automatic activation of Handsfree capability.
Lets you program settings for trunks.
Choose Yes to prevent other users, who have access to this line on their telephones, from using
the line while a call is already in progress.
A section of programming that lets you program whether or not the telephone is able to
automatically log call information for calls on a specific line and whether Message Waiting
information is displayed (providing you have subscribed to Call Display services).
Choose Yes for an Auxiliary Ringer installed) to ring for an incoming call on a specific line or at
a specific telephone. The default is Yes for ringing on specific lines, and No for ringing at specific
teleohones.
music
Choose Yes to hear music through the telephone’s speaker (music source must be connected).
The default is No.
Bypass restriction
Call Handling
Call Services
Camp timeout
Choose Yes to allow a user to bypass restrictions or retain the default No to prevent bypass when
using a Speed Dial number.
A sub-heading for a programming section that lets you program system-wide settings for various
call features.
A sub-heading for a programming section that lets you program settings for Voice Messaging,
External Visual Message Waiting indication, Call Display Information and Call Logs.
Choose the number of seconds a call can remain camped before it returns to the originating
teleohone. The default is 45 seconds.
Capabilities
A sub-heading for a programming section that lets you create Dialing filters. Assign the filters to
Set abilities, Line abilities and Class of Service passwords.
Configuration
(Installer only) A heading for a programming that lets you program system-wide configuration settings.
Control sets
Assign a control telephone to each external line to turn the Service Mode ON or OFF for the line.
The default control telephone is DN 21. Enter the numbers for the line(s), the name of the person
who uses the telephone and the new
DN
if changed.
COS passwords
Create up to 20 six-digit passwords that control access and use of the system.
Dial mode
Lets you program settings for physical trunk lines. Select the mode of dialing on this line: Pulse or
Tone. The default is Pulse.
Dialing filters
Direct dial #
Direct-dial
Directed pickup
Display digits
DRT delay
Build tables of up to 25 Dialing filters (00 to 24) using restrictions and exceptions.
Assign the digit used to dial a Direct-dial telephone. The default is 0. The digit can be 0, 1.2,
5, 6, 7, 8. 9 or None. It cannot be the same as the first digit of a DN, of a Line Pool access code,
the External Line access code or the Call Park Prefix.
A
sub-heading for a programming section that lets you assign a Direct-dial telephone for
single-digit dialing.
Directed Pickup allows you to answer calls at any telephone by specifying the ringing telephone’s
number (unlike Call Pickup Group only allows pickup of calls within a specified group of
telephones). The default is Yes.
Retain the default, Yes, to see the telephone number on the display when using the speed dial
number or change the setting to No to turn off the display.
If “DRT to prime” is activated, assign
the number of rings before
a call is transferred. Default is 3