Norstar Compact 616 DR5, Руководство по установке

Страница: 262 / 287

204 Glossary
button:
A button that ends
a call in the same way that
hanging up the receiver does. It
may also be used to end
Startup, Administration
programming and feature
operations.
Set Copy:
A programming
section that allows you to copy
programmable settings from
one telephone to another-of the
same type. Set Copy provides
two options: duplicating System
Data and User Data, or
duplicating System Data only.
Run/Stop:
A character that
creates a breakpoint in a
programmed external dialing
sequence. When you press a
programmed key, the system
dials the number up to the
Run/Stop. When you press it
again, the system dials the
digits following the Run/Stop.
Set does not Provide the
same copy capability as the
display button, which is
more selective of the settings
that can be duplicated.
Set filter:
See Dialing filter.
Set Names:
A sub-heading in
Administration programming
s
that allows you to assign Names
of up to seven characters to
SAPS: See
Station Auxiliary
Power Supply.
telephones.
Service Modes:
A feature that
provides special ringing and
telephone access after normal
office hours, or when there are
few people available to answer
calls. Certain features become
active when one or more lines
are placed into a Service Mode.
Service Modes settings are
assigned in Administration
programming.
Set:
A telephone.
Set ability:
A sub-heading in
Administration programming
under which set filters, line/set
filters, and a variety of system
features are assigned to
individual telephones.
Set Relocation: See
Automatic
Telephone Relocation.
Shift button:
A small triangular
button beside the dual-memory
buttons on the upper half of the
Telephone. Press the
shift button to store or access
features on the top of the
dual-memory buttons.
Show Time:
A feature that
allows you see the current date
and time on the
telephone display while you are
on a call.
Station:
An individual telephone
or other device.
Compact System Coordinator Guide