Norstar Compact 616 DR5, Руководство по установке

Страница: 188 / 287

,130 Line Pools
Notes
You do not usually need to enter the Line Pool feature code to
use a line pool. Simply dial the line pool access code on an
internal line. If you have no free internal lines, you will need to
use the feature code to get a line pool. You will also need it to
program access to a specific line pool onto a memory button.
You can program a button to access a line pool by programming
the Line Pool feature code and a line pool access code onto a
memory button in Feature programming When
all the lines in a line pool are busy, the indicator for the Line Pool
button turns on. The indicator turns off when a line becomes
available.
Your system can have three line pools, and a telephone
can be programmed to access any number of them.
You can use a line pool only to make external calls.
If no lines are available in the line pool, you can use Ring Again
at the busy tone. You will be notified when a line in the line pool
becomes available. See Ring Again.
Your Customer Service Representative gives telephones access
to line pools in Configuration programming. Each line pool is
assigned a line pool access code in Configuration programming.
Compact DR5 System Coordinator Guide