Nordson VersaBlue VA, Руководство пользователя

Страница: 30 / 272

Introduction 2‐2
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Residual Risks
In the design of the unit, every measure was taken to protect personnel from
potential danger. However, some residual risks cannot be avoided:
Risk of burns from hot material.
Risk of burns when filling the tank, from the tank lid, and from the tank lid
supports.
Risk of burns when conducting maintenance and repair work for which
the melter must be heated up.
Risk of burns when attaching and removing heated hoses.
Material fumes can be hazardous. Avoid inhalation.
Risk of damage to cables/lines belonging to the customer, if they were
installed such that they come into contact with hot or rotating parts.
The safety valve may malfunction due to hardened or charred material.
Note on Manual
The IPC Generation II has been replaced with the new model
Generation III (software version 6.00.000). All of the instructions in the
manual refer to Generations II and III, unless otherwise stated. Exception:
Appendix B for Generation I.
When ordering spare parts, state the P/N on the control panel ID plate.
Features that the customer may not have purchased - depending on the
configuration of the melter - are also described in the section
Operation .
In this case they are not visible on the control panel.
Other Sources of Information
User's Guide
The illustrated guide delivered with the melter offers a quick source of
information on common operator level tasks.
Product Resource Disc
On the CD there is an electronic version of the manual, the catalog of spare
parts and other information on using and servicing the melter.