Nordson Tribomatic 2, Руководство пользователя по изделию

Страница: 30 / 73

Installation
3-4
E 1998 Nordson Corporation
All rights reserved
303 815A
Issued 3/98
Manual 37-32
Sprayheads are available in many configurations. Standard sprayheads
can be modified for your application using optional nozzles. Figure 3-4
illustrates the various ways in which these nozzles can be installed. The
following optional nozzles are available:
Threaded nozzles —Use to modify standard sprayheads. They are
threaded on one end to screw into the sprayhead base.
Angled nozzles —Install on existing sprayhead nozzles, using cylindrical
nozzles as connectors. These nozzles are not threaded.
Pinpoint, flat, cylindrical, and 8-orifice nozzles —Install on sprayhead
tubing ends or on threaded or angled nozzles. The 8-orifice nozzle must
be installed on a cylindrical nozzle. Cylindrical nozzles are also used as
connectors.
1
2
3
5
6
1
2
3
4
1
3
2
4
1
1
3720005A
To sprayhead base
1
To existing sprayhead tube ends
or threaded or angled nozzles
6
6
1
To existing sprayhead tube ends
or threaded or angled nozzles
Fig. 3-4 Connecting feed hose, air tubing and ground wir e
1. Cylindrical nozzles
2. Flat nozzles 3. Pinpoint nozzles
4. 8-orifice nozzles 5. Threaded nozzles
6. Angled nozzles w/o threads
3. Installing Nozzles on
Sprayheads