Nordson Tribomatic 2, Руководство пользователя по изделию

Страница: 29 / 73

3720004A
1
2
Installation
3-3
E 1998 Nordson Corporation
All rights reserved
303 815A
Issued 3/98
Manual 37-32
4. Attach a ground wire (6) to the ground stud (4). Tighten the knurled
knob to secure the wire.
5. Route the ground wire to the control unit and connect it to the correct
terminal in the rear panel.
3720003B
3
2
1
4
5
6
7
Fig. 3-2 Connecting feed hose, air tubing and ground wire
1. Diffuser
2. Charge module body
3. Sprayhead 4. Ground stud
5. Feed hose 6. Ground wire
7. Air tubing
6. See Figure 3-3. Before installing a sprayhead on the gun, remove the
nozzle cone (1) from the interior of the sprayhead base (2) with a pair
of pliers. (The cone is only used with the original Tribomatic gun.)
7. See Figure 3-2. Install the sprayhead (3) on the end of the charge
module (2) with a twisting motion.
8. Adjust the gun-to-workpiece distance and position.
Fig. 3-3 Removing nozzle cone
1. Nozzle cone
2. Sprayhead base
2. Feed Hose, Air Tubing
and Ground Wire
Connections
(contd.)