Nordson Tribomatic 2, Руководство пользователя по изделию

Страница: 11 / 73

Safety
1-5
E 1995 Nordson Corporation
All rights reserved
Issued 11/95 A1EN − 03 − [SF − POWD] − 4
Only qualified personnel, physically capable of operating the equipment
and with no impairments to their judgement or reaction times, should
operate this equipment.
Read all component manuals before operating a powder spray system.
A thorough understanding of all components and their operation will help
you operate the system safely and efficiently.
S
Use this equipment only in the environments for which it is rated. Do
not operate this equipment in humid, flammable, or explosive
environments unless it has been rated for safe operation in these
environments.
S
Before starting this equipment, check all safety interlocks,
fire-detection systems, and protective devices such as panels and
covers. Make sure all devices are fully functional. Do not operate the
system if these devices are not working properly. Do not deactivate
or bypass automatic safety interlocks or locked-out electrical
disconnects or pneumatic valves.
S
Know where EMERGENCY STOP buttons, shutoff valves, and fire
extinguishers are located. Make sure they work. If a component
malfunctions, shut down and lock out the equipment immediately.
S
Before operating, make sure all conductive equipment in the spray
area is connected to a true earth ground.
S
Never operate equipment with a known malfunction or leak.
S
Do not attempt to operate electrical equipment if standing water is
present.
S
Never touch exposed electrical connections on equipment while the
power is ON.
S
Do not operate the equipment at pressures higher than the rated
maximum working pressure of any component in the system.
S
Know the pinch points, temperatures, and pressures for all equipment
that you are working with. Recognize potential hazards associated
with these and exercise appropriate caution.
S
Wear shoes with conductive soles, such as leather, or use grounding
straps to maintain a connection to ground when working with or
around electrostatic equipment.
6. Operation