Nordson Tribomatic 2, Руководство пользователя по изделию

Страница: 46 / 73

Repair
6-6
E 1998 Nordson Corporation
All rights reserved
303 815A
Issued 3/98
Manual 37-32
The following paragraphs provide repair procedures for the inner and
outer wear sleeves.
1. See Figure 6-2. Push the extension (3) toward the body (1) and twist
it counterclockwise to release it from the body pins. Pull the
extension out of the body, and slide it off the inner and outer wear
sleeve assembly (2). The outlet wear sleeve assembly (4) will remain
inside the extension.
2. Pull the inner and outer wear sleeve assembly from the body. The
inlet wear sleeve assembly will stay in the body.
3. See Figure 6-6. Hold the outer wear sleeve (3) in your hand and
push on the outlet distributor (2). Discard the outer wear sleeve and
spacing ring (4).
4. See Figure 6-7. Unscrew the inlet distributor (1) or outlet
distributor (5) from the threaded rod (2) and remove the distributors
and threaded rod from the inner wear sleeve (4). Discard the inner
wear sleeve and positioning ring (3).
3720013A
2
1
3
4
Fig. 6-6 Inner and outer wear sleeve
1. Inner wear sleeve
2. Outlet distributor 3. Outer wear sleeve 4. Spacing ring
4. Inner and Outer Wear
Sleeves
Removal