Lafferty Equipment Manufacturing, Inc.
Installation & Operation Instructions
Model # 969402 · A-40 SS Airless Foam Wand W/ Fan Nozzle
# 807069
REQUIREMENTS
Water Temperature
up to 180°F
Pressure Washer
Must have factory equipped
chemical injector that
operates properly using a
black soap nozzle
Discharge Hose
3/8" ID minimum
OPTIONS
Pressure Washer Hose & Trigger Gun
HP 3/8" x 50' Hose & Trigger Gun Kit
WEIGHT & DIMENSIONS
Single Package
Shipping Weight
2 lbs.
Shipping Dimensions
15" x 8" x 5"
501-851-2820
OVERVIEW
Designed to replace the black soap nozzle on pressure washers that use a factory chemical injector. The A-40 Airless Foam Wand quick connects to a pressure
washer gun and injects atmospheric air into the chemical solution to greatly increase volume and coverage ability. This stainless steel unit will create and project wet,
clinging foam on to any surface in a fan pattern or zero degree stream for increased foam throw distance.
W A R N I N G !
R E A D A L L
I N S T R U C T I O N S B E F O R E
U S I N G E Q U I P M E N T !
Lafferty Equipment Manufacturing, Inc. • 5614 Oak Grove Road • North Little Rock, Arkansas 72118
