Quick Reference
A 1-3
Part 1022914G03
E
2007 Nordson Corporation
Siphon Hose
Siphon Hose ID:
25 mm (1 in.) minimum
Siphon Hose Port Threads:
1-in. NPTF
An optional siphon accessory group is available that includes a siphon hose
with stainless steel swivel fittings, a stainless steel siphon rod, and a
strainer. Refer to
Options
in this section.
Pump Ordering
Use the part number below to order a new PermaFlo 830 pump.
Part
Description
1023362
PUMP, PermaFlo 830, Type U packings
1065202
PUMP, PermaFlo 830, Type F packings
Service Kits
Packing Gland Kits
Packing gland kits replace both upper and lower packings. Type L packings
are optional. Order the correct packing type for your pump and application.
Refer to
Packing Materials and Applications
for more information.
Part
Description
Note
1027528
KIT, packing, type U, PermaFlo 830
A
1060458
KIT, packing, type F, PermaFlo 830
A
1042203
KIT, packing, type L, PermaFlo 830
B
NOTE A: Shipped with pumps. Refer to
Pump Ordering
in this section and the identification plate on your pump to
order the packing shipped with your pump.
B: Optional packing type.
Packing Materials and Applications
Type
Material
Applications
F
PFTE V-rings stacked with
leather V-rings
Most commonly used packing in the finishing industry. Use
for strong solvents and abrasive materials.
L
UHMWPE V-rings stacked
with leather V-rings
Good for thin or abrasive materials. Compatible with
waterborne and most solventborne materials.
U
Ultra-High Molecular Weight
PolyEthylene (UHMWPE)
Good for highly abrasive materials. Compatible with
waterborne and most solventborne materials. Slight
swelling may occur when exposed to hydrocarbon solvents.
