Air Motor Parts
D 1-1
Part 1022914G03
E
2007 Nordson Corporation
Section D 1
Air Motor Parts
Introduction
To order parts, call the Nordson Finishing Customer Support Center at
(800) 433
−
9319 or your local Nordson representative. Use these parts
lists and illustrations to locate and describe parts correctly.
Change Notice
This notice details changes made to the air motor on revision D of the
PermaFlo 830 pump assembly. The revision letter follows the pump part
number on the ID plate on the front of the hydraulic section.
Mufflers:
The mufflers were redesigned from a curved design to a flat design. The
muffler bolt hole pattern and part number did not change.
Air Pilot Valves:
The original air pilot valves consisted of two sets of cartridges. The new air
pilot valves are individually replaceable components. The cartridges are still
available as replacement parts (refer to Old Style Air Motor parts list).
The upper and lower air motor heads used with the cartridges are obsolete
and no longer available. If you replace either cylinder head, you must also
order new 3-way valve and actuator kits (refer to New Style Air Motor parts
list).
Air Valve Assembly:
The original air valve assembly had a separate pilot valve (shuttle valve)
mounted on the front of the air valve body and connected directly to the
valve body air passages. The revised air valve assembly has a different
pilot valve mounted on the underside of the air valve and connected to the
valve body by air tubing and fittings.
The original pilot valve is still available as a replacement part for the old
style air valve assembly.
The air valve assembly part number has not changed. The revised air valve
assembly is a one-for-one replacement for the original assembly. The
valve repair kits can be used on either version of the valve.
