45
!
,-.
&(!
2
Refer to the instructions
in chapter 3 (parallel and
serial), chapter 4 (Ethernet),
or chapter 5 (Macintosh) to
connect your printer.
3
Plug the power cord
into the connector
on the left side of the
printer.
»
Note:
In compliance with UL
guidelines, “The appliance
inlet is considered to be the
main disconnect device.”
4
Turn the printer on.
After a brief warmup (less than
five minutes), the printer pro-
duces a startup page.
If a startup page doesn’t print, see chapter 8 “Troubleshooting
Printer Problems” in the
Operation
manual.
If you see this...
It’s probably
because...
Do this...
Colors aren’t
registering
properly.
The OPC drum
cartridge is not pushed
all the way in.
Repeat the steps in “Install the
OPC Drum Cartridge” on page
2-19.
!"
!
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500