*
+
,-.
(noncondensating). If the ambient temperature is 90° F (32° C),
relative humidity should be maintained below 48%. If the relative
humidity is 85%, the ambient temperature should be maintained
below 18° F (28° C).
In a well-ventilated area, but away from wind that can blow on it.
At an altitude of 0–8200 feet (0–2500 m).
On a hard, flat, level, stable surface capable of supporting
approximately the 150 lb (68.4 kg) printer plus consumables and
media. The printer must be placed within 0.16 inches (5 mm)
front to rear and 0.39 inches (10 mm) left to right of level.
Near your computer—6.5 feet (2 m) or less for an IEEE 1284
bidirectional parallel connection; cables for other connections
may be longer.
Close to an easily accessible power supply.
On an exclusively dedicated power outlet. If the printer is con-
nected to the same circuit used by other high-current machines,
such as a copier or air conditioner, or to an electrically noisy
machine, low voltage or noise may cause overheating, computing
errors resulting in data loss, and improper performance.
With enough space to allow adequate ventilation and easy servicing.
With clearances shown on page 2-4.
Caution: The printer has ventilation grilles on the side and back,
which must remain unobstructed for safe operation. The printer
should be located at least 6 inches (150 mm) from the wall.
Obstructing the grilles could present a fire hazard. Also, to allow
proper operation of the printer, including replacement of
consumables and routine checks, the illustrated clearances
should be provided.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
