/
7
!
1
Turn off both the printer and the Macintosh.
2
Connect the printer to the Macintosh via the printer’s built-in
Ethernet port.
3
Turn on both the printer and the Macintosh.
4
Install a printer driver.
See “Macintosh Printing Software” on page 5-3.
5
Now you’re ready to print.
4
If you’re replacing a PostScript laser printer, you can probably start
printing now with the printing software already in place. Refer to your
application documentation for instructions on sending documents to
the printer.
However, if you want to be able to use all your printer’s special
features or if you’ve never printed to a PostScript printer before, we
recommend you take a few minutes to make sure you have the fol-
lowing printing software installed:
QMS Macintosh Utilities
A PostScript printer driver, usuallly installed with the Macintosh
system software
Application-specific printer files
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500