/5
!
'( )*
Interface cables are not included with your printer. If you’re replacing
a printer, you may already have the necessary cables. If not, you’ll
need to purchase the cables from your vendor or a local computer
store.
To connect your printer to a single PC, you need a serial cable with
either a 9- or 25-pin connector (depending on your PC’s serial port)
and a 9- or 25-pin null modem assembly to connect to the serial
cable. Depending on the type of null modem assembly you have, you
may also need a 9- to 25-pin adapter. See your cable vendor for more
specific cable assembly information.
b
Attach the 36-pin end of the cable to the
printer’s parallel port, and close the clips.
3
Turn on both the printer and the PC.
A startup page should print. If it doesn’t, refer to chapter 8, “Trou-
bleshooting,” of the
Operation
manual.
4
Test the communication between the printer and the PC.
You can do this by sending a file from one of your applications, or
refer to chapter 8, “Troubleshooting,” of the
Operation
manual.
#"
$"
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
