Nomadix AG 2300, Руководство пользователя, Страница: 277 / 294

A
CCESS
G
ATEWAY
6
Troubleshooting 265
Management Interface Error Messages
The following table contains the error messages associated with the Management Interface (CLI and Web).
All messages are listed alphabetically.
Error Message Cause
AAA must be enabled before adding a
subscriber to the profile database. You are attempting to add a subscriber profile while AAA is
disabled.
Command not available “xx” The system does not recognize your command (“xx” denotes
your input).
Current settings were not archived. This message is displayed if you answer “no” when prompted to
overwrite the configuration archive file with new settings.
Current settings were not changed. This is either a response to your decision not to change settings,
or the message is generated by the system when it fails to locate
the data it needs.
Error loading factory settings. The system cannot find the default configuration file when
attempting to restore the factory settings.
Error occurred, ARP entry not added. The IP or MAC address is invalid. Ensure that you input the
correct format for these fields.
NFS client support not included. This message is displayed when the system reboots and NFS
clients are not supported.
No matching MAC address found in profile
database. The system could not match the MAC address you defined while
attempting to remove a subscriber profile.
[not defined] This is the factory default for some system parameters.
The system must be reset to function
properly.
The system must be rebooted to function
properly! You have made changes to the system’s configuration that
requires you to reboot before your changes become effective.
Warning: before using this command you
must FTP a valid boot image to the flash. When upgrading the software, the system needs the new boot
image file. You must FTP the file from NOMADIX™ to your local
hard drive.
Warning: no DHCP services are available to
subscribers. This message is displayed because you have disabled both the
external DHCP relay and the system’s DHCP service. To make
DHCP available to subscribers, at least one of these functions
must be enabled.
“x” is ambiguous. The system has more than one option it can display. You must
provide additional characters to narrow the system’s choices
down to just one.
“xxx” is invalid, enter ... Your input is not recognized by the system.