Nomadix AG 2300, Руководство пользователя, Страница: 127 / 294

A
CCESS
G
ATEWAY
System Administration 115
1.
From the Web Management Interface, click on Configuration , then PMS . The Property Management
System Settings screen appears:
2.
You may disable PMS services by clicking on the
PMS services disabled
radio button, then clicking
on the
Save
button to save your choice. If you disable PMS services you can exit this procedure,
otherwise proceed with the rest of the screen.
3. PMS Port Test Mode
provides a utility to confirm that the PMS port is working. To run the utility, you
must have the Nomadix-supplied db9-rj45 adapter plugged into same device that you used to check the
command-line interface. Set up a terminal session, with the same terminal settings you previously used.
The utility confirms both transmit and receive, and is the functional equivalent of an external loopback
test.
To test the PMS port, click
PMS Port Test Mode , then click Save . If the PMS serial interface is working
properly, characters typed into the Console program will be acknowledged as seen below: