Nomadix AG 2300, Руководство пользователя, Страница: 165 / 294

A
CCESS
G
ATEWAY
System Administration 153
You must now assign a State for this port-location. Possible states are, No Charge for using this port-
location, Charge for Use , and Blocked . If you do not assign a conditional state, the state is registered as
“No Charge” by default.
7. If applicable, select the Default QoS Policy for the port assignment you are adding.
8. Select the conditional state you want to assign to this port-location.

If you choose Charge for Use additional configurations are available. Refer to the Note. Port-based
Policies should be enabled from the Configuration -> AAA page for these settings to take effect.

Choose Enable Facebook Login to allow Facebook authentication.

Choose Enable RADIUS Billing if you want RADIUS billing to be enabled on this port.

Choose Enable PMS Billing if you want PMS based room billing to be enabled on this port.
 Choose Enable PayPal Billing if you want PayPal based billing to be enabled on this port
You can select any number of billing methods per port.

Select from Billing Plan(s) available on port . You can assign a specific billing plan to a port, enable
all existing billing plans, or assign specific billing plans to the port.
Please note that while it is possible to set the value of a per-port configuration parameter independently
of the value of the corresponding global parameter, the feature itself is disabled for a port unless both
the per-port and global parameters are set to enabled. Thus:

RADIUS authentication for a port is enabled only if the RADIUS Client is globally enabled AND the
per-port
enable RADIUS billing parameter is set.

PayPal billing for a port is enabled only if PayPal Services is globally enabled AND the per-port
enable PayPal billing parameter is set.

PMS billing for a port is enabled only if PMS Services is globally enabled AND the per-port enable
PMS billing parameter is set.

Facebook authentication for a port is enabled only if Port-Based Policies is enabled and that port allows
Facebook as an authentication type.
9. Click on the Add button to save your changes (the message: Entry added or updated in the location
file appears), or click on the Restore button if you want to reset all the values to their previous state.
Updating a Port-Location Assignment
The procedure for updating a port-location assignment is similar to adding a port-location assignment. The
difference between the two procedures is how they are presented to you. For example, if you already have
port-locations assigned and you enter an existing “port” value, each data field that you go through (port,
location, state, and description) displays the value currently assigned to the field.
To update a Port-Location assignment, simply update the fields with new values.
If you have updated a port-location assignment, you may want to change its description
to distinguish from the old assignment. Although the old assignment will no longer exist
in the system, a meaningful description can often be a valuable quick reference guide.
Exporting Port-Location Assignments {Export}
This procedure shows you how to export your current port-location assignments to the “location.txt” file. The
location.txt file is stored in: /flash/location.txt (resident in the Access Gateway’s flash memory).
Exporting your current port-location assignments to the Access Gateway’s flash memory
will overwrite the existing location.txt file.