Nomadix AG 2300, Руководство пользователя, Страница: 114 / 294

A
CCESS
G
ATEWAY
102 System Administration
Defining IPSec Tunnel Settings {IPSec}
1.
From the Web Management Interface, click on Configuration, then IPSec. The IPSec Tunnel Settings
screen appears:
2. Check the Enable IPsec checkbox to enable IP Security.
3. Check Enable NAT Traversal to allow packets to traverse NAT/IPsec boundaries.
4. Click Save to save the setting.
To add or modify IPsec tunnel peers, see
Managing IPSec Tunnel Peers on page 102. To add or modify
IPsec security policies, see Managing IPSec Security Policies on page 104.
Managing IPSec Tunnel Peers
You can add a new IPSec tunnel peer or modify the settings of an existing IPSec tunnel peer from the IPSec
Tunnel Settings screen.