Nomadix AG 2300, Руководство пользователя, Страница: 112 / 294

A
CCESS
G
ATEWAY
100 System Administration
engine performs a defined mode of network address translation based on packet type and protocol (for
example, IKE etc…).
NSE provides the following iNAT enhancements:
 A separate iNAT interface page shows the settings for each port in either WAN or OOS modes.
Ports in SUB mode are not shown.

Each of the displayed ports has individual iNAT / Subscriber tunnel settings accessible by
clicking on that port’s link.

The interface allows easy deletion of any iNAT address range. iNAT settings are
configured individually for each interface.
1. From the Web Management Interface, click on Configuration , then iNAT . A list of current iNAT
settings appears. You can select a specific interface to change its iNAT configuration.
The iNAT ™ screen appears:
2. Enable or disable the iNAT feature, as required.