NKT Photonics Koheras ADJUSTIK HP Скачать руководство пользователя страница 4

Страница: 4 / 115

•

Chapter 3

“Communicating with the Laser”

— Provides information and

procedures on how to setup a PC with the laser’s management software and

connect it to the laser.

•

Chapter 4

“Turning ON the Laser”

— Contains procedures on how to safely

turn the laser emissions on and off using the management software.

•

Chapter 5

“Using CONTROL”

— Includes descriptions of all NKT CONTROL

menu, settings, and panel items.

•

Chapter 6

“Mechanical Installation”

— Includes information and procedures

on how to correctly install the laser chassis. Procedures within this chapter

focus on providing adequate temperature regulation.

•

Chapter 7

“Connecting the Laser”

— This chapter provides the information on

how to physically connect the safety interlock, power, the optical

connections, and trigger output signals.

•

Appendices

— The guide includes multiple appendices including laser

specifications, support contact details, accessory descriptions, laser part

numbers, and miscellaneous procedures supporting the laser operation and

installation.

Added information

and safety notices

Lasers are highly dangerous devices that can cause serious injury and property

damage. This guide uses the following symbols to either highlight important

safety information or provide further information in relation to a specific topic.

Note:

Highlights additional information related to the associated topic and/or

provides links or the name of the NKT guides describing the additional informa

tion.

Caution:

Alerts you to a potential hazard that could cause loss of data or damage

the system or equipment.

Warning:

The laser safety warning alerts you to potential serious injury that may

be caused when using the laser.

Revision

The section records the document revision details.

September 2020 – First release - the document has been rewritten and

overhauled from earlier releases.

March 2021 – Release 1.1 added the Koheras ADJUSTIK HP

April 2021 – Release 1.0 revision rolled back to 1.0 due to internal system

requirements.

Содержание Koheras ADJUSTIK HP




















































































































Результаты поиска

Содержание Koheras ADJUSTIK HP

Отзывы:

Похожие инструкции для Koheras ADJUSTIK HP

Бренды по названию

Популярные бренды

NKT Photonics Koheras ADJUSTIK HP, Руководство по эксплуатации продукта

Результаты поиска

Содержание Koheras ADJUSTIK HP

Отзывы:

Похожие инструкции для Koheras ADJUSTIK HP

Бренды по названию

Популярные бренды