NKT Photonics Koheras ADJUSTIK HP, Руководство по эксплуатации продукта

Страница: 71 / 115

71
CONTROL overview
Toggling panels
Use the Menu > Window drop down menu to check and uncheck panels to be
displayed. A blue check mark indicates the panel is displayed.
Figure 36 Panels dragged outside the main window
Note: Clicking the ‘X’ in the upper right corner of any panel also closes it.
Connecting to the
laser
When CONTROL is launched, a Welcome panel is displayed as in Figure 37 . In
the menu bar, click the ‘Connect’ drop down menu and then click on the COM
port your laser is using to connect the PC to the laser. The Control and Status
panels are displayed once the laser connects to CONTROL.
See “Connecting the laser to a CONTROL PC” on page 57
Figure 37 Welcome screen and connecting
Device Selector
The Device Selector panel shows an icon for each connected device. Figure 38
shows the device selector for an ADJUSTIK laser. If multiple lasers are detected
by CONTROL, click on the ADJUSTIK icon to brings up its controls. To modify the
ICON text, see “View” on page 81 .
Figure 38 Device selector panel
Check the panels to
display them
Click
Click to select