NKT Photonics Koheras ADJUSTIK HP, Руководство по эксплуатации продукта

Страница: 24 / 115

Module variants
24
Module variants
Both the Koheras ADJUSTIK and ADJUSTIK HP are available in four variants. The
variants are in general, classified by their wavelength, and output power.
Table 1
describes the primary technical differences between the variants showing the
typical parameter values.
Table 1 ADJUSTIK and ADJUSTIK HP variant specifications
Part numbers
Table 20
in
Appendix E
lists available Koheras ADJUSTIK and ADJUSTIK HP lasers by
their part numbers.
Center wavelength
The center wavelength of ADJUSTIK lasers are typically set to 1550.12 nm (ITU
DWDM C-BAND Channel 34) or 1064.00 nm. However, the lasers can also be
specially ordered from the factory with other center wavelengths ranging from 1535
to 1580 nm or 1030 to 1120 nm 1 . (Note that for ADJUSTIK HP lasers, wavelength
ranges available are limited from either 1545 to 1565 nm or 1060 to 1075 nm
2
.)
Output power
Depending on the module type, the output power varies between greater than 10 mW
and up to and including 2 W. The output power is generally fixed for ADJUSTIK
lasers; however, an
Amplitude modulation
option can be specified with some variants
to adjust the output power over a large dynamic range. For ADJUSTIK HP lasers, the
output power is variable from 10-100% of its maximum power output.
Variant Standard λ Other λs Output Power Polarization
Maintaining
Fast Modula -
tion
X15 1550.12 1535 - 1580 nm 22.5 mW Yes Yes
E15 1550.12 1535 - 1580 nm
40 mW 1
1. Minimum output ~30% of the maximum
Yes Yes
C15 1550.12 1535 - 1580 nm
> 10 mW (fixed)
Yes Yes
Y10 1064.00 1030 - 1120 nm > 10 mW (fixed) Yes Yes
HP X15 1550.12 1545 - 1565 nm 200 or 2000 mW Yes Yes
HP E15 1550.12 1545 - 1565 nm 200 or 2000 mW Yes Yes
HP C15 1550.12 1545 - 1565 nm 200 or 2000 mW Yes Yes
HP Y10 1064.00 1060 - 1075 nm 200 mW Yes Yes
1. Contact NKT Photonics support for more information - see
Support contact details on
page 104
.