Nitto DURA PRINTER SL, Инструкция по эксплуатации

Страница: 60 / 98

MAINTENANCE
4-17
5
Unfold the peeling arm.
Press the right-hand lever of the peeling unit
to unfold the peeling arm.
6
While rotating the peeling roller,
remove any residual dust or
grime using with the cloth which
let isopropyl alcohol soak.
7
After cleaning, replace the label
roll, reposition the peeling arm,
and close the front cover.
8
Lock the arm unit.
Lower the arm unit. Then press where it
says "PUSH” on either side to lock the arm
unit.
If the arm unit does not lock the first time,
press “PUSH" again to lock it.
For information on how
to install the label roll,
refer to “Installing the
Label Roll” on page
1-11.
Cleaning solution is
inflammable. After
use, close the cap
securely to avoid the
possibility of fire.