Nitto DURA PRINTER SL, Инструкция по эксплуатации

Страница: 3 / 98

PREFACE
II
IMPORTANT INFORMATION
• There is a potential risk involved in the operation of this product. Follow this manual to
install, operate, maintain, and check the product.
• If the instructions within the manual are not observed, or if injuries or damage are
caused by carelessness, misuse, or tampering, neither NITTO DENKO corporation nor
our dealers shall assume liability.
● With modern industrial equipment, new materials and processing methods as well as high-speed
components increase the risk of injury. It is impossible for us to cater for all such risks. Nor can we
anticipate and take into accout all problems which may arise during operation of the equipment in question.
If you feel a particular point is not covered in the manual, it is better to err on the side of caution and
consider that the equipment is not capable of carrying out this function. When installing, operating,
maintaining, and checking the product, extreme care should be taken, closely observing not only the
descriptions and explanations in this manual and indications on the body of the product itself, but also the
safety measures.
●
The optional simplified cutter unit contains an assembly with a blade to cut labels. Bringing your fingers
close to, or in contact with, this assembly exposes you to a risk of injury or laceration. When installing or
removing the cutter unit, be sure to turn off the power switch beforehand.
●
To avoid any problems or failures, carry out daily maintenance.
Refer to “Cleaning the Thermal Head and Platen Roller” described in chapter 4 of the manual.
● The copyright to this manual is held and reserved by NITTO DENKO corporation. No part of diagrams or
technical information may be copied or disclosed without prior written permission of NITTO DENKO
corporation.
● If you have any questions regarding the content of this manual or require further information, check the
model (type) and serial number on the nameplate of your product, and then contact your dealer or our
company directly. Do not proceed with your work until you have received a satisfactory response to your
inquiry.