BEFORE OPERATION
1-20
9
If the optional peeling unit has
been installed:
(This step is required only if the peeling unit
has been installed.) If yours is the standard
configuration unit or is equipped with the
simplified cutter unit, skip this step.
Open the front cover and unfold the peeling
arm. Pass the backing paper under the front
cover and reposition the peeling arm as it
was. Gently pull the backing paper so that it
is taut.
10
Close the top cover.
11
Press the power switch to turn
on the printer.
The POWER and ONLINE lights come on;
the printer is now online.
12
The uptake point of the label roll
is located.
Press the “ONLINE” button to make the
printer go offline. Then press the “FEED”
button several times.
*Check that the labels advance smoothly.
If the discharge port
of the label backing
paper under the front
cover becomes
blocked, the paper
may become wound
around the platen
roller.
Содержание DURA PRINTER SL
