Control System - Cable Version
32
Service Manual – SC450
Brush Activation Push-Button Disassembly/Assembly (new version)
Smontaggio
1
Drive the machine on a level floor. Make sure that the machine cannot move independently.
1 Make sure that the power supply cable plug is disconnected from the electrical mains
2 Remove the screws (A) and move the brush activation push-button (B)
3 Loosen the ring nut (C) off the bulkhead connection and push the cable (D) inside the handlebar as much
as possible, then pull the cables (E) with the connectors (F) of the push-buttons (B).
4 Disconnect the connectors (F) and retrieve the push-buttons (B)
Assembly
5
Assemble the components in the reverse order of disassembly, and note the following:
•
Before tightening the ring nut (C) push the cable (D) inside the handlebar as much as possible
F
E
E
F
C
D
B
B
A
A
A
P200009B
