ENGLISH
USER MANUAL
40
33018305(3)2010-01 A
RS 851
WHEEL REPLACEMENT
Preliminary operations
Turn the ignition key (24, Fig. D) to OFF position and remove it.
1.
Engage the parking brake (13, Fig. E).
2.
Check that the machine cannot move with one wheel lifted (the parking brake operates only on the front wheels). If necessary
3.
keep the machine stationary by placing wedges on the wheels contacting the ground.
Remove the wheel according to the following procedure.
4.
Front wheel removal/installation
Open the right side upper door (28, Fig. G) by disengaging the fastener (29) with the supplied key.
5.
Unscrew the knobs (38, Fig. F) and remove the machine lifting bracket (37).
6.
Near the wheel to be removed (1, Fig. AG), place the lifting bracket (2) on the bosses (3) of the machine frame as shown in the
7.
fi
gure, then secure it with the split pin (4). Place a jack (5) under the bracket (2), as shown in the
fi
gure.
Loosen tyre nuts before jacking.
8.
WARNING!
The jack (5, Fig. AG) is not part of the machine equipment. Use a suitable jack with a minimum lifting capacity of
6,614 lb (3,000 kg).
Activate the jack (5, Fig. AG) carefully, and lift the wheel (1) until it is slightly detached from the ground.
9.
Unscrew the mounting nuts and remove the wheel (1, Fig. AG).
10.
Install the wheel (1, Fig. AG) by performing steps from 5 to 9 in the reverse order.
11.
Wheel mounting nut tightening torque: 295 lb·ft (400 N·m).
Rear wheel removal/installation
Place a jack (6, Fig AG) under the relevant housing (9) in the rear axle (7), as shown in the
fi
gure.
12.
Loosen tyre nuts before jacking.
13.
WARNING!
The jack (5, Fig. AG) is not part of the machine equipment. Use a suitable jack with a minimum lifting capacity of
6,614 lb (3,000 kg).
Activate the jack (6, Fig. AG) carefully, and lift the wheel (8) until it is slightly detached from the ground.
14.
Unscrew the mounting nuts and remove the wheel (8, Fig. AG).
15.
Install the wheel (8, Fig. AG) by performing steps from 11 to 13 in the reverse order.
16.
Wheel mounting nut tightening torque: 295 lb·ft (400 N·m).
Содержание 13300113
