Nidec AD07-E-1-1-023-1-0002, Инструкция по установке и эксплуатации

Страница: 9 / 56

Summary
Chapter 1
P. 5
Chapter 2
P. 7
Chapter 3
P. 12
Chapter 4
P. 15
Chapter 5
P. 21
Chapter 6
P. 29
Chapter 7
P. 31
Chapter 8
P. 42
AD700E
9
General information
Important safety information
General Information and Ratings
Mechanical Installation
Operation
Parameters
Analog and Digital Input Macro
Configurations
Power Wiring
Chapter 9
P. 48
Chapter 10
P. 50
Modbus RTU Communications
Technical Data
Trouble Shooting
Chapter 11
P. 54
PREVIOUS VIEW
2.1 QUICK ST
AR
T UP - 2.2
2
2.1 QUICK START UP
2.2 QUICK START PROCESS
Action
Identify the Enclosure Type, Model Type and ratings of your drive from the
model code on the label. In particular
- Check the voltage rating suits the incoming supply
- Check the output current capacity meets or exceeds the full load current
for the intended motor
Unpack and check the drive. Notify the supplier and shipper immediately of
any damage.
Ensure correct ambient and environmental conditions for the drive are met
by the proposed mounting location.
Install the drive in a suitable cabinet (IP20 Units), ensuring suitable cooling
air is available. Mount the drive to the wall or machine (IP66).
Select the correct power and motor cables according to local wiring
regulations or code, noting the maximum permissible sizes
If the supply type is IT or corner grounded, disconnect the EMC filter before
connecting the supply.
Check the supply cable and motor cable for faults or short circuits.
Route the cables
Thoroughly check the installation and wiring
Check that the intended motor is suitable for use, noting any precautions
recommended by the supplier or manufacturer.
Check the motor terminal box for correct Star or Delta configuration where
applicable
Commission the drive parameters
Ensure suitable wiring protection is provided by installing a suitable circuit
breaker or fuses in the incoming supply line
Connect the power cables, especially ensuring the protective earth
connection is made
Connect the control cables as required for the application
Step
1
2
3
4
5
6
7
8
14
9
10
15
11
12
13
See Section
Identifying the Drive by Model Number
Environmental
General
Mechanical Dimensions and Mounting – IP20 Open Units
Guidelines for Enclosure Mounting – IP20 Units
Mechanical Dimensions – IP66 (Nema 4X) Enclosed Units
Guidelines for mounting (IP66 Units)
Rating Tables
EMC Filter Disconnect
Motor Terminal Box Connections
Managing the Keypad
Parameters
Rating Tables
Grounding the Drive
Wiring Precautions
Incoming Power Connection
Control Terminal Wiring
Connection Diagram
Analog and Digital Input Macro Configurations
3.1
10.1
4.1
4.3
4.4
4.5
4.6
10.2
5.2
5.6
6.1
7
10.2
5.1
5.3
5.4
5.8
5.9
8
Page
12
50
15
15
16
17
18
51
22
24
29
31
51
21
22
23
25
26
42