Nibe AMS 10-16 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 104

background image

Menu 7.5.3 [U] Heating system

The climate system that the vacation set back is to affect
is selected here. If shunt group 2 is present the menu can
be set to “Off”, “System 1”, “System 2” or “System 1+2”.
In other cases only "Off" and "System 1" can be selected.

Setting range: Off, System 1, System 2, System 1+2

Default value: Off

Menu 7.5.4 [U] Offset heating curve

How much the heating curve is to be offset during the
holiday period is set here.

If the relevant climate system has a room temperature
sensor, the change is given in degrees.

Setting range: -10 – 10

Default value: -5

Menu 7.5.5 [U] HW off

If the hot water charge is to be shut off during the holiday
period this is set here.

Setting range: No, Yes

Default value: Yes

Menu 7.5.6 [U] Return

Return to menu 7.5.0.

Menu 7.6.0 [N] Silent mode

The period for silent mode, where the heat pump operates
at a lower noise level by limiting the compressor and fan
speeds, is selected in the sub-menu.

Menu 7.6.1 [N] Silent mode time

The time interval for silent mode is set here. The period is
selectable for a maximum of 23:45 (hh:mm) with incre-
ments of 15 min. If the same time is selected for stop and
start the function is off.

Default values: off

Menu 7.6.2 [N] Return

Return to menu 7.6.0.

Menu 7.7 [N] Return

Return to menu 7.0.

8.0 [N] Other adjustments

Menu 8.1.0 [N] Display settings

Settings concerning language and menu type are set in
the sub-menus to this menu.

Menu 8.1.1 [N] Menu type

The menu type is chosen here.

Normal, covers the normal user's needs.

[N]

Extended, shows all menus except the service menus.

[U]

Service, shows all menus, returns to normal menu level
30 minutes after the last button was pressed.

[S]

NOTE

Incorrect settings in the service menus can damage

the property and/or heat pump.

Setting range: N, U, S

Default value: N

Menu 8.1.2 [N] Language

Language settings are made here.

Menu 8.1.3 [U] Display contrast

The display's contrast is set here.

Setting range: 0 – 31

Default value: 20

Menu 8.1.4 [U] Light intensity

The light intensity in idle mode is set here. Idle mode starts
30 minutes after the last button was pushed.

Setting range: 0=off, 1=low, 2=average.

Default value: 1

Menu 8.1.5 [N] Return

Return to menu 8.1.0.

Menu 8.2.0 [N] Op. mode settings

Settings regarding auto mode can be made in the sub-
menus to this menu.

Menu 8.2.1 [N] Allow add. heat

At which operating mode the electric addition is to be
permitted to produce hot water and heat when needed
is selected here.

Setting range: Off, Heating, H Cooling, Cooling

Default values: Heating

Menu 8.2.2 [N] Add. heat mode

Selected if electric addition is to be used to produce hot
water and heat.

Setting range: Off, On

Default value: Off

Menu 8.2.3 [U] Stop temp. heating

The average outdoor air temperature at which the heat
pump (in auto mode) is to stop heat production.

When the average outdoor air temperature falls below
Stop temp. heating – Hysteresis (menu 8.2.5) heating starts
again.

Setting range: 1 – 43 °C

Default value: 17 °C

NIBE™ SPLIT

56

Miscellaneous

Control

«
...
56
57
58
59
60
...
»

Содержание AMS 10-16









































































































Отзывы:

Нет отзывов

Похожие инструкции для AMS 10-16

nanoe CZ-CNEXU1

Бренд: Panasonic Страницы: 108

Бренд: Zephyr Страницы: 6

Бренд: Kelvinator Страницы: 24

Бренд: Magnavox Страницы: 19

Бренд: Klimaire Страницы: 215

Бренд: INVENTOR Страницы: 5

Бренд: Soleus Air Страницы: 10

Бренд: Omega Страницы: 56

Бренд: DCG Страницы: 18

Softaire RERV-80

Бренд: Air Specialties Страницы: 16

Бренд: EAS Electric Страницы: 234

Delos Intellipure 950P

Бренд: HealthWay Страницы: 18

Nexya S4 E Series

Бренд: Olimpia splendid Страницы: 336

Бренд: Airwell Страницы: 71

Бренд: Montgomery Ward Страницы: 9

01.352103.02.001

Бренд: Princess Страницы: 14

Бренд: emmeti Страницы: 112

Бренд: GE Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды