Nibe AMS 10-16 Скачать руководство пользователя страница 56

Страница: 56 / 104

Menu 3.6.1 [U] Supply temp.at +20

The supply temperature at an outdoor air temperature of
+20 °C is selected here.

Setting range: 0 – 80* °C

Default value: 20 °C

Menu 3.6.2 [U] Supply temp.at -20

The supply temperature at an outdoor air temperature of
-20 °C is selected here.

Setting range: 0 – 80* °C

Default value: 35 °C

Menu 3.6.3 [U] Buckling temperature

Here you select at what outside air temperature the break
point shall occur.

Setting range: -15 – 15 °C

Default value: 0

Menu 3.6.4 [U] Supply t. at buckl

You set the required flow temperature for the break point
here.

Setting range: 0 – 80* °C

Default value: 30 °C

Menu 3.6.5 [U] Return

Return to menu 3.6.0.

Menu 3.7 [U] Supply/Return temp 2

The present actual flow and return line temperatures for
climate system 2 are shown here.

Menu 3.8 [N] Return

Return to menu 3.0.

4.0 [N] Outdoor temp.

Menu 4.1 [N] Outdoor avg. temp.

This menu shows the average outdoor temperature accord-
ing to the set value in menu 4.2 (factory setting: 24h).

Menu 4.2 [U] Outdoor filter time

Here you select during how long the average temperature
in menu 4.1 is calculated.

Setting range: 1 min, 10 min, 1h, 2h, 4h, 6h, 12h, 24h

Default value: 24h

Menu 4.3 [U] Outdoor avg. 1min.

Shows the average outdoor temperature over the last
minute.

Menu 4.4 [N] Return

Return to menu 4.0.

5.0 [N] Heat pump

Menu 5.1 [N] Number of starts

The accumulated number of starts with the compressor
in AMS 10 is shown here.

Menu 5.2 [N] Run time compressor

The accumulated time that the compressor has been used
in AMS 10 is shown here.

Menu 5.3 [U] Time to start

Time until the compressor start in the AMS 10 is shown in
this menu.

Menu 5.4 [U] Outdoor temp. Tho-A

This menu shows the outdoor air temperature that the
heat pump measures.

Menu 5.5 [U] Heat Ex Tho-R1

This menu shows the evaporator temperature in the heat
pump at sensor Tho-R1.

Menu 5.6 [U] Heat Ex Tho-R2

This menu shows the evaporator temperature in the heat
pump at sensor Tho-R2.

Menu 5.7 [U] Suction temp. Tho-S

This menu shows the suction gas temperature in the heat
pump.

Menu 5.8 [U] Hot gas Tho-D

This menu shows the hotgas temperature in the heat
pump.

Menu 5.9 [U] Liquid line temp.

This menu shows the liquid line temperature in the heat
pump.

Menu 5.10 [U] Condensor out / max

Shows the current and max. allowed temperature after
the condenser.

Menu 5.11 [U] HP

The current high pressure and corresponding temperature
during heating are shown here. During cooling, the actual
low pressure and corresponding temperature are shown.

Menu 5.12 [U] LP LPT

The current low pressure is shown here.

Menu 5.13 [U] Fan speed

No function.

Menu 5.14.0 [U] CompFreq act/set

The actual and set point value for the compressor fre-
quency are shown here.

Menu 5.14.1 [U] OU current CT

The present phase current to AMS 10 is shown here.

Menu 5.14.2 [U] Inverter temp Tho-IP

The current inverter temperature is shown here.

Menu 5.14.3 [U] Return

Return to menu 5.14.0.

Menu 5.15.0 [S] OU communication

Readings regarding any communication errors can be
made in the sub-menus to this menu.

Menu 5.15.1 [S] Com. error rate

Shows the percentage of incorrect communications with
AMS 10 since start-up.

Menu 5.15.2 [S] Com. errors

Shows the total number of incorrect communications with
AMS 10 since start-up.

NIBE™ SPLIT

Miscellaneous

Control

Содержание AMS 10-16









































































































Результаты поиска

Содержание AMS 10-16

Отзывы:

Похожие инструкции для AMS 10-16

Бренды по названию

Популярные бренды

Nibe AMS 10-16, Инструкция по установке и обслуживанию

Результаты поиска

Содержание AMS 10-16

Отзывы:

Похожие инструкции для AMS 10-16

Бренды по названию

Популярные бренды