Nibe AMS 10-16 Скачать руководство пользователя страница 16

Страница: 16 / 104

Dealing with comfort disruption

Use the following list to find and remedy any heating or
hot water problems.

Action

Cause

Symptom

Check and replace blown fuses.

Circuit or main miniature circuit breaker
(MCB) tripped.

Low hot water temperature or a lack of hot
water.

Check and replace any blown circuit and
main fuses.

Heat pump and immersion heater do not
heat.

Reset the earth circuit-breaker, if the earth
circuit-breaker trips repeatedly, call an
electrician.

Possible earth circuit-breaker tripped.

Set the switch to 1.

Switch (SF1) set to mode 0.

Wait a few hours and check if the hot water
temperature rises.

Large hot water demand.

Adjust the start temperature setting in
menu 1.2.

Too low start temperature setting on the
control system.

Reset the earth circuit-breaker, if the earth
circuit-breaker trips repeatedly, call an
electrician.

Possible earth circuit-breaker tripped.

Low room temperature.

Check and replace any blown circuit and
main fuses.

Heat pump and immersion heater do not
heat.

Adjust the setting.

Incorrect setting of "Curve slope", "Heating
curve, offset" and/or "Cooling curve, off-
set".

Check and replace blown fuses.

Circuit or main miniature circuit breaker
(MCB) tripped.

Change operating mode to ”Auto” or "Au-
toK".

Heat pump in incorrect operating mode
”Hot water” or "Cooling".

Switch off one/several of the power con-
sumers.

The current limiter has restricted the cur-
rent because many power consumers are
being used in the property.

Adjust the setting.

Incorrect setting of "Curve slope", "Heating
curve, offset" and/or "Cooling curve, off-
set".

High room temperature.

Change operating mode to ”AutoK”.

Heat pump in incorrect operating mode.

Adjust the settings. Check menu 2.2.1, 2.2.2
and 8.2.4.

Incorrect settings for cooling.

Wait 30 minutes and check if the com-
pressor starts.

Minimum time between compressor starts,
alternatively time after power switch on
not achieved.

The compressor does not start.

See section ”Alarms”.

Alarm tripped.

Activate operating mode ”Only additional
heat”.

Alarm cannot be reset.

Check and replace any blown circuit and
main fuses.

Display not lit.

Check that the circuit breaker to the indoor
unit is not off.

Check that the switch (SF1) is in normal
position (1).

NIBE™ SPLIT

For Home Owners

Dealing with comfort disruption

Содержание AMS 10-16









































































































Результаты поиска

Содержание AMS 10-16

Отзывы:

Похожие инструкции для AMS 10-16

Бренды по названию

Популярные бренды

Nibe AMS 10-16, Инструкция по установке и обслуживанию

Результаты поиска

Содержание AMS 10-16

Отзывы:

Похожие инструкции для AMS 10-16

Бренды по названию

Популярные бренды