NewMar Mountain Aire 2022, Руководство пользователя

Страница: 41 / 222

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
36
APPLIANCES
FAST COOL
The Fast Cool feature assists during times of high
refrigerator use, full grocery loads or temporarily warm
room temperatures.
•
Press FAST COOL to set the freezer and refrigerator
to the coldest temperature settings. Press FAST COOL
again to return to the selected temperature set point.
NOTES:
•
The Fast Cool icon will be illuminated while the
refrigerator is in Fast Cool mode.
•
The Fast Cool feature will turn off automatically after 24
hours.
MOISTURE CONTROL
The moisture control feature turns on a heater to help
reduce moisture on the door hinge seal. Use in humid
environments or when you notice moisture on the door
hinge seal. The refrigerator uses more energy when
Moisture Control is ON.
NOTE: The moisture control icon will light up to indicate the
feature is ON. To turn on/off the moisture control feature:
•
Internal Control Panel - Press and hold MOISTURE
CONTROL for 3 seconds.
• External Control Panel - Press and hold LIGHT for 3
seconds.
WATER FILTER STATUS LIGHT AND
RESET
The filter reset control allows you to restart the water filter
status tracking feature each time you replace the water
filter.
• Press and hold WATER FILTER for 3 seconds, to reset
the water filter status to Good. The water filter icon will
turn blue.
AIR FILTER STATUS LIGHT AND RESET
The filter reset control allows you to restart the air filter
status tracking feature each time you replace the air filter.
•
Press and hold AIR FILTER for 3 seconds, to reset the
air filter status to Good. The air filter icon will turn blue.
WATER DISPENSER (ON SOME MODELS)
IMPORTANT:
• Allow 3 hours for the refrigerator to cool down and chill
water.
•
Allow 24 hours to produce the first batch of ice. Discard
the first three batches of ice produced.
•
The dispensing system will not operate when the
refrigerator door is open.
FLUSH THE WATER SYSTEM
Air in the water dispensing system can cause the water
dispenser to drip. After connecting the refrigerator to a
water source or replacing the water filter, flush the water
system. Flushing the water dispensing system forces
air from the water line and filter and prepares the water
filter for use. Additional flushing may be required in some
households.
NOTE: As air is cleared from the system, water may spurt
out of the dispenser.
•
Using a sturdy container, depress and hold the water
dispenser paddle for 5 seconds.
•
Release the dispenser paddle for 5 seconds.
•
Repeat steps 1 and 2 until water begins to flow.
•
Once water begins to flow, continue depressing
and releasing the dispenser paddle (5 seconds on,
5 seconds off) until a total of 4 gal. (15 L) has been
dispensed.
DISPENSE WATER
IMPORTANT:
•
The dispensing system will not operate when the
refrigerator door is open.
•
The display screen on the dispenser control panel will
turn off automatically and enter “sleep” mode when the
control buttons and dispenser paddles have not been
used for 2 minutes or more. While in “sleep” mode, the
first press of a control button will only reactivate the
display screen, without changing any settings. After
reactivation, changes to any settings can then be made.
If no changes are made within 2 minutes, the display
will re-enter “sleep” mode.
To dispense water, press a sturdy glass against the water
dispenser paddle. Remove the glass to stop dispensing.
DISPENSER LIGHT
When you use the dispenser, the light will automatically turn
on. If you want the light to be on continuously, you may turn
on the light. The light icon will illuminate when the light is
ON.
•
ON: Press LIGHT quickly to turn on the dispenser light.
•
OFF: Press LIGHT quickly to turn off the dispenser light.
NOTES:
• If you unintentionally press and hold the Light button
for 3 seconds or longer, you will turn on the Moisture
Control feature. If this happens, press and hold LIGHT
for 3 seconds again to turn off the Moisture Control
feature. The dispenser lights are LEDs that cannot be
changed.
DISPENSER LOCK
The dispenser can be turned off for easy cleaning or to
avoid unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the
refrigerator, to the ice maker, or to the dispenser light. It
simply deactivates the controls and dispenser paddles.
•
Press and hold FAST COOL for 3 seconds to lock the
dispenser.
•
Press and hold FAST COOL for 3 seconds again to
unlock the dispenser. The lock icon will illuminate when
the dispenser is locked.