© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
120
ENTERTAINMENT SYSTEMS
1. Press and hold “POWER” for two seconds or until the
TRAV’LER interface displays “POWER ON.”
2. Once the unit has been powered on, release
“POWER.”
3. The interface screen will display the type of satellite
dish on the top line.
4. The TRAV’LER antenna will enter the search mode
as part of its normal operation and will display
“Searching” on the bottom line.
5. The antenna will find its home position and begin
to look for a satellite. Upon finding a satellite, the
antenna will fine-tune or “peak” on the signal.
6. In automatic search mode, the TRAV’LER antenna
will lock onto multiple different satellites. The
antenna will display an asterisk for each satellite
found.
TIP: If you want to turn off the power to the TRAV’LER
antenna after the antenna has locked onto satellites,
press “POWER” and “SELECT” at the same time. Before
traveling, make sure to press “POWER” and wait for the
antenna to start to power up; then press “POWER” again
to initiate the stow sequence.
TRAV’LER SK-SWM3 SATELLITE
ANTENNA
•
DIRECTV Satellites: 99°, 101°, 103°
•
Views 3 Satellites Simultaneously
TRAV’LER SK-1000 SATELLITE
ANTENNA
•
DISH Satellites: 110°, 119°, 129° (61.5° Manual Only)
•
Views 3 Satellites Simultaneously
•
Bell TV Satellites: 82°, 91°
TRAV’LER SK-7003 SATELLITE
ANTENNA MOUNT
•
Shaw Direct Satellites: 107°, 111°
•
Views 3 Satellites Simultaneously
User Menu For Manual
Operation
The interface includes a user menu for some advanced
features. The options most commonly used are the
ability to change the dish type, check software/hardware
versions, change desired satellite configuration, or
manually move the dish.
Ready To Travel?
The TRAV’LER antenna is not meant for use while
traveling. To stow the unit when you are ready to travel,
press “POWER” one time. The unit will stop what it is
doing and return to the stowed position. The TRAV’LER
interface will not turn off unless the TRAV’LER antenna is
successfully stowed. Visually inspect that the antenna is in
the stowed/ travel position before traveling. Do not move
the vehicle until the TRAV’LER antenna is stowed.
WARNING
!
Improper use of the user menu could cause damage
to the TRAV’LER antenna and/or vehicle. Do not enter
the user menu for regular operation.
Emergency Manual Stow
If unable to stow the TRAV’LER antenna, it may be
necessary to use emergency manual stow. Emergency
manual stow is meant as a last resort and is not meant for
common usage! To use emergency manual stow, unplug
the interface box. Then, remove the black plastic bolt from
the back of the mount. Insert a 5/16” socket extension into
this auxiliary drive. Turn the auxiliary drive clockwise to
lower the unit. Do not use a drill!
Emergency Power Off
The antenna comes with an emergency power off feature.
To activate it, press and hold “POWER” and then press
“SELECT” while still holding “POWER”. The TRAV’LER
antenna will stop and turn off. If the emergency power off
feature is used, the antenna may not be in a safe position
for travel. Do not move the vehicle until the unit is stowed.
Source(s): Winegard Trav’ler Antenna DIRECTV SK-SWM3
Product(s): This source is associated with more than one product. Refer
to Newgle for more information about the product(s) offered for your
coach’s model year.
Audio Systems
This article provides basic operation instructions for a Bose TV Speaker (Model: 838309-1100).
Bose TV Speaker Operation (Model: 838309-1100)
Содержание Mountain Aire 2022
Страница 1: ...SM 2022...