NewMar Mountain Aire 2022, Руководство пользователя

Страница: 171 / 222

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
166
INTERIOR
Internal LED Light
This safe includes an internal LED light that will activate
when the correct combination is entered and will remain
on for 30 seconds.
If you write down your combination, you must keep
this information in a secure place, away from children,
not inside the safe.
IMPORTANT
!
Locking The Safe
To lock the safe, close the door and turn the knob to the
left to the 12:00 position.
Battery Replacement
This safe uses 4 - AA batteries. Under normal use,
batteries will last about 1 year.
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard or rechargeable
batteries.
If the batteries are low, the yellow light will flash when
you start to enter your code. To replace the batteries,
open the battery compartment on the back of the door by
pushing the tab in the direction of the arrow and install all
new batteries.
Turning The Keypad Sound
Off/On
Your safe comes with the “Beep” sound turned on. You
can turn off the “Beep” sound of the keypad by pressing
the Volume key. To turn the “Beep” sound on, press the
Volume key again.
Product(s): Stack-On PWS-1822-E Security Wall Safe Owner’s
Manual(Model: PWS-1822-E, Newmar Part Number: 144484)
Shades and Window Coverings
Shade Operation via KIB LCD Touchscreen
This article provides brief operating instructions for a KIB LCD touchscreen.
Overview
Touch the inactive (blank) screen to activate and display
the Lighting screen. Once the panel becomes inactive
and times out, it will default back to the blank screen.
Touch the Home icon to reveal the Home Menu page,
which may include buttons for lighting, shades, fans,
systems, or display brightness controls, as well as as icon
in the upper right corner for More Information (i). Once a
button is touched, it will turn red, indicating the circuit is
active. The buttons are gray while the circuit is inactive.
Shades
Touch the SHADES button, followed by the
corresponding shade button to start and stop shade
operation. Once a button is touched, it will turn red,
indicating the circuit is in active operation. The buttons
are gray while the circuit is inactive. The available
buttons will vary by coach model and floorplan, as well
as installed options. Potential buttons may include, but
are not limited to:
•
DOOR DAY SHADE
•
DOOR NIGHT SHADE
•
DINETTE DAY SHADE
•
DINETTE NIGHT SHADE
•
ALL DAY SHADES
•
ALL NIGHT SHADES