NewMar Mountain Aire 2022, Руководство пользователя

Страница: 109 / 222

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
104
ELECTRONICS
MODIFYING VEHICLE PROFILES
In vehicle profile selection screen, press the UP ARROW
and then the EDIT button to access the vehicle profile
settings to adjust for your specific vehicle parameter. In
Edit mode, you will see the symbol behind each vehicle
type. Tap the symbol to access and select the details of
the vehicle profile. Here the following basic options can
be changed:
•
Name (Allows you to rename the vehicle profile if
desired)
•
Vehicle type
•
Maximum speed of the vehicle
•
Fuel consumption in cities
•
Fuel consumption on highways
•
Engine type
Fuel consumption and engine type information is used
to calculate and estimate amount of fuel needed as well
as the approximate of CO2 produced. Also changeable
for larger vehicle profile types are the “Extended Vehicle
Settings.”
EXTENDED VEHICLE SETTINGS
The extended vehicle settings allow drivers to further
specify their vehicle parameters to allow the program to
offer the best available route for their vehicle type. Please
make sure that all the specifics of your vehicle (height,
weight, axles, etc.) are correctly entered into the vehicle
profile settings. Incorrect settings will result in incorrect
routes.
By default the option “Show this page for each route
planning” is enabled. This option will prompt you to
confirm that the vehicle profile specification is still
accurate.
Warnings Settings
SPEED LIMIT
The program is able to warn you if you exceed the current
speed limit. This information may not be available in your
region, or may not be fully correct for all roads on the
map. This setting lets you decide whether you wish to
receive visible and/or audible warnings. The following
warning types are available:
•
Visual warning: the current speed limit is shown on
the map when you exceed it.
•
Audio and Visual warning: besides the current speed
limit being shown on the map, you also receive a
verbal warning when you exceed the speed limit with
the set percentage.
If you prefer to see the speed limit sign on the map all the
time (normally, it is shown only if you exceed the limit), you
can set it here. You can also set the relative speed above
which the application initiates the warning by adjusting a
slider. The value can be different within and outside Cities.
DISABLING THE SPEED LIMIT
WARNING
Issue: The speed limit warning is signaling even when the
actual speed limit is kept.
Cause: The speed limit in the digital map data might differ
from the actual speed limit of your current location.
Solution: Disable the speed warning by performing the
following steps.
1. Tap the MENU button (3 horizontal lines).
2. Tap the SETTINGS button.
3. Tap the WARNINGS button.
4. Tap the Speed Limit button.
5. Tap the Warn When Speeding (Audio and Visual)
button
6. Tap the Disabled option.
ALERT POINTS
Tap it to receive a warning when approaching a road
safety camera or other Alert Points like school zones or
railroad crossings. You must make sure that using this
feature is legal in the country where you intend to use it.
You can set the warning type for the different Alert Point