manualshive.com logo in svg

Newave PowerValue 11, Руководство пользователя

Поделиться
Скачать
Newave PowerValue 11 Скачать руководство пользователя страница 7

 

 

Newave_OPM_PV11_PV31 _GB_250805.doc   Installation 

Page 7 

 

3 Installation 

3.1 INTRODUCTION 

This chapter contains all the necessary information for the correct unpacking, positioning, cabling and 
installation of the UPS 

PowerValue

TM

. 

ALL THE OPERATIONS IN THIS SECTION MUST BE PERFORMED BY AUTHORISED 
ELECTRICIANS OR BY QUALIFIED PERSONNEL.  
NEWAVE will take no responsibility for any personal or material damage caused by 
incorrect cabling or operations or activities, which are not carried out as per the 
instructions contained in this manual. 

3.1.1  Receipt of the UPS 

Upon receiving the UPS, carefully examine the packing container and the UPS for any sign of physical 
damage. In case of rupture or suspect inform immediately: 

a)  The carrier and  
b) NEWAVE 

SA. 

Ensure that the received UPS corresponds to the material indicated in the delivery note. 

The packing container of the 

PowerValue

TM

 protects it from mechanical and environmental damage. 

To increase its protection the UPS is wrapped with a plastic sheet. 

3.1.2 Nameplate 

The technical specifications of the 

PowerValue

TM

 are provided on the nameplate, which is situated at 

the front of the UPS. Check if it corresponds to the purchased material mentioned in the delivery note. 

3.2 UNPACKING 

When unpacking the UPS observe the "FRAGILE" and "ARROW" on the packing container. 

Perform the following steps to unpack the UPS: 

• 

Cut wrappers and remove packing container by pulling it upwards; 

• 

Remove the plastic cover from the UPS; 

• 

Remove pallet from the UPS; 

• 

Retain the packaging materials for future shipment of the UPS; 

• 

Examine the UPS for any sign of damage. Notify your carrier or supplier immediately if 
damage is apparent. 

3.3 BATTERIES 

The standard batteries of 

PowerValue

TM

 are sealed, maintenance-free batteries, internally mounted 

and will typically be connected when the UPS is commissioned. 

The battery life depends very much on the ambient temperature. A temperature range b18° 
and +23°C will achieve the optimum battery life. 

If the UPS is delivered without batteries, NEWAVE is not responsible for any damage or 
malfunctioning caused to the UPS by incorrect wiring 

!

 

Содержание PowerValue 11













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды