New Holland 200 Series, Руководство оператора

Страница: 30 / 292

2 - SAFETY INFORMATION
Specific precautions to this machine
DANGER
Crushing hazard!
Do not enter or exit the operator's compartment while the loader arms are raised or unsupported. Rest
the loader arms on the ground or verify that loader arm is being supported by the loader arm strut or
loader arm lock pin before entering or exiting the operator's compartment.
Failure to comply will result in death or serious injury.
D0168A
• All machines are equipped with safety support features when service or maintenance of the machine is required.
You may secure the loader arm in a raised position and secure the cab in a tilt position. These features allow
greater access to the internal components of the machine. Read and understand the “Loader arm lock and cab tilt
procedure - radial lift machines” page
2-18 or “Loader arm lock and cab tilt procedure - vertical lift machines” page
2-22 in this manual.
• Place all controls in neutral before leaving the cab and be careful not to engage them accidently when entering or
exiting the cab.
• Before leaving the operators compartment check the interlock system so movement of controls do not result in
machine movement. Follow the “Loader arm and bucket hydraulic interlock” procedure on page 7-37 .
• Keep the load or tool as low as possible while moving the machine around the job site.
• Confirm that the coupler lock pins are engaged with the bucket or attachment retaining tabs.
• Do not over fill the bucket. Dirt, rocks and debris can enter the operator area.
Fire extinguisher
It is recommended that you have a fire extinguisher on your machine. Contact your dealer for the type and location
of a fire extinguisher on this machine.
2-14