New Holland 200 Series, Руководство оператора

Страница: 25 / 292

2 - SAFETY INFORMATION
Proper entry and exit
DANGER
Crushing hazard!
Do not enter or exit the operator's compartment while the loader arms are raised or unsupported. Rest
the loader arms on the ground or verify that loader arm is being supported by the loader arm strut or
loader arm lock pin before entering or exiting the operator's compartment.
Failure to comply will result in death or serious injury.
D0168A
WARNING
Fall hazard!
Jumping on or off the machine could cause an injury. Always face the machine, use the handrails
and steps, and get on or off slowly. Maintain a three-point contact to avoid falling: both hands on the
handrails and one foot on the step, or one hand on the handrail and both feet on the steps.
Failure to comply could result in death or serious injury.
W0141A
Enter the machine
1. Face the cab entry point.
2. If applicable, open the cab door.
3. Hand holds are provided on the loader arm, front cab
posts, or on the inside of the cab door. Grab the hand
holds.
4. Place one foot on the loader arm coupler step or on
the bucket step.
931002286
1
5. Pull yourself up, face the machine, and stand on the
step(s).
6. Position your hands so that you are comfortable with
stepping into the cab.
7. Place one foot into the center area of the cab. A step
area is provided between the foot pedals, if equipped.
8. Step into the cab, turn your body, and sit in the oper-
ator’s seat.
931002285
2
2-9