other information to join to a new network by simply reset the device to restore to the
factory setting.
Operation:
Hold press the auxiliary key for 10 seconds until the gren indicator flashes quickly
which indicating factory restored setting has achieved. And then the device will be
turned off automatically.
Affirming detection zone
During motion sensor installation, you would want to be sure how far and wide does
ZB11C actually detect especially for security system installation.
Operation:
To force the device to run in the zone detection mode,
hold press the auxiliary
key for 3s , release when indicator flashes once in green. Zone detection mode will stay
active for 10 minutes.
Indication:
When motion detected, red indicator will light up if surrounding conditon of light switching
is met, otherwise red indicator will flash several times.
No LED indication indicates no motion is been detected.
To exit from zone detection mode before 10 minutes elapse, short press auxiliary key
once.
