Part B -For temperature reporting (for power switch, go to Part A)
Move your mouse to the temperature sensor circle on top of ZB11C where the arrow is
pointing. Then right click your mouse should display menu and select
Bind
.
Device binding configuration box will appear similar to the one bellow
Under the Device tab (label
A
) select the device to be paired (normally an interface
device). Under Cluster column (label
B
) look for temperature measurement. Make sure
the empty box next to must be ticked.
If you do not see
0402-Temperature measurement
, you may obtain it from a pool of
Cluster ID
by a mouse click on
Select ClusterID
button (label
C
).
Cluster ID configuration box will appear similar to the one bellow
Temperature Sensor
