Automatic zone registration
ZB11C contains zone feature to work with the security system in the network. After it has
joined to the network, the device needs to register itself to the security system called CIE
(Control and Indicating Equipment). The registration is an automatic process followed by
network join. All you need is to observe whether it has successfully registered.
Observing registration to the CIE:
(1) If CIE device does not exist in the network the LED indicator
flashes twice in green
.
(2) If CIE device is found and successfully enrolled, it flashes
6 times otherwise flashes
4 times meaning enrollment failed. Trigger the device by motion will force it to
re-enroll. The siren will only sound when it has truly enrolled.
Refer to
View
enrolled zone device table
section at the end of this manual.
Device pairing (Binding)
Operation:
Step 1:
Operate binding on the power outlet device (refer to its own user manual).
Step 2:
Within 5 seconds
short press on the binding key (once for motion detector
binding, twice for lighting control binding, 3 times for temperature report binding)
If pairing successful the green LED indicator
flashes 5 times
otherwise flashes
10 times quickly.
Unbinding operation
:
Unbinding procedure is exactly the same as binding operation.
The device will reverse paired.
S
tep 2.
Featuring the device by pairing
Note
It is a good practice that there should have only one CIE device in a given network at
the time when ZB11C is joining into the network. If you happen to have two or more
CIE devices present in the network, ZB11C will somehow confused as which to
enroll. This may or may not cause enrollment rejection. If this happens right after
ZB11C joined to the network, please power off those CIE devices and leave only one
in the network, then power ZB11C on again to allow it to register to the intended CIE.
Or for some reason you should leave the CIE on which you do not wish to enroll
ZB11C into, simply enroll it to this one first and then apply CIE reassignment. Refer
to
Assigning ZB11C to a preferred CIE system
section.
