ZiG-BUTLER
During device installation, you will go though permit join and device pairing. Most of
the time you need to physically access to a device that is out of your reach. It
becomes handy when you can program through software on a PC wirelessly. Our
ZiG-BUTLER allows you to do that. Of course, any other 3
rd
party ZigBee enabled
software is also applicable.
ZiG-BUTLER software is to be installed on a PC or a server. The system needs a
Z103 USB dongle or a ZigBee to PC hardware interface such as a Z202 gateway to
communicate with ZigBee network.
Join ZB11C into the network
If your ZiG-BUTLER sees a coordinator or a router device, you should be able to
see the icon similar to the one bellow:
