Introduction
ZB11C is a motion detector for triggering a remote target device wirelessly. It is a motion
detection for intrusion alarm system and can also work as an on/off control lighting switch
and a temperature sensor. When the Infrared detects movement, it sends the message to
the network for specific task.
In ZigBee network ZB11C device act as an end-device node which does not permit any
device to join through it. It enters to
sleep mode
when not triggered by movement to save
power. When
triggered by movement
it sends message and status notification to the
network for specific application.
What is ZigBee?
ZigBee is a short range wireless transmission technology which defined for a minimum
complexity, low power consumption, low data rate, cost effective wireless solution. ZigBee
lies in between wireless markup technology and Bluetooth. ZigBee is based on
IEEE802.15.4 standard, the mutual co-ordination between thousands of sensors to
exchange data. Sensor to sensor or node-to-node communication is achieved through
relays of control data between devices with only a fraction of energy use which denoted
for highly transmission efficiency.
Note: Wireless communication, in some real use cases, can be limited by the signal
blockage. Please consult your service provider or place of purchase.
