Netscout OneTouch AT 10G, Руководство пользователя

Страница: 177 / 248

Chapter 8: Tools
175
2
Scroll down to Maintenance Tools section and tap the
Management Port button.
Wi-Fi Adapter Management Port MAC Address
To view the Wi-Fi Adapter Management Port MAC address:
1
On the HOME Screen, tap TOOLS .
2
Scroll down to Maintenance Tools section and tap the
Management Port button.
3
Toggle Active Port to Wi-Fi.
4
Insert the supported Wi-Fi Adapter. The MAC address will be
shown in the status line of the screen.
VLAN
To make the analyzer a member of a VLAN:
1
On the HOME screen, tap TOOLS .
2
Tap the Wired button.
3
Tap the VLAN button.
4
Set Tag to On .
5
Tap the ID button and enter the VLAN ID.
6
Tap the Priority button and select a priority. This sets the
priority field in the header of all packets sent by the analyzer.
It has no effect on received packets.
Wait for Rx Frame
By default, when you connect the analyzer to a switch port, the
analyzer attempts to ensure that the port is in the forwarding
state before conducting tests. If you know that the switch port is
in the forwarding state immediately upon link, set
Wait for Rx
Frame to Off .
To change the Wait for Rx Frame setting:
1
On the HOME screen, tap TOOLS .