Netscout OneTouch AT 10G, Руководство пользователя

Страница: 136 / 248

OneTouch AT 10G
User Manual
134
Email (SMTP) Test
Purpose
The Email (SMTP) test provides digital notification of wired
connectivity using SMTP mail service.
This test is useful for sending a text message to the user's phone
for complete Internet connectivity feedback, or allowing a test
supervisor to maintain a repository of all analyzer testing being
performed in the field. The message identifies the analyzer being
used, and the wired link used such as the nearest switch.
The SMTP Server may be a private server or a universally available
free email service such as Gmail. Refer to the SMTP service
provisioning information for the SMTP server name and port.
Configuration
SMTP Server - Enter the name of the SMTP mail server that will
process the email.
The Name button allows you to assign a custom name to the test.
See also: “Name” on page 84 .
Time Limit - The amount of time allowed for the SMTP server to
acknowledge that the email was successfully sent.
From Email - If your SMTP server blocks invalid addresses, this will
need to be a valid address. Otherwise, any name is acceptable.
This address will appear in the from field of the email that the
analyzer will send.
To Email - Enter the recipient’s address here.
SMTP Server Port - Usually port 25 for non-SSL, or port 587 for SSL/
TLS.
Login - If the SMTP server requires authentication, set Login to On
and enter the username and password.